Download Black-box Modeling of Distortion Circuits with Block-Oriented Models This paper describes black-box modeling of distortion circuits. The analyzed distortion circuits all originate from guitar effect pedals, which are widely used to enrich the sound of an electric guitar with harmonics. The proposed method employs a blockoriented model which consists of a linear block (filter) and a nonlinear block. In this study the nonlinear block is represented by an extended parametric input/output mapping function. Three distortion circuits with different nonlinear elements are analyzed and modeled. The linear and nonlinear parts of the circuit are analyzed and modeled separately. The Levenberg–Marquardt algorithm is used for iterative optimization of the nonlinear parts of the circuits. Some circuits could not be modeled with high accuracy, but the proposed model has shown to be a versatile and flexible tool when modeling distortion circuits.
Download Improving Unsupervised Clean-to-Rendered Guitar Tone Transformation Using GANs and Integrated Unaligned Clean Data Recent years have seen increasing interest in applying deep learning methods to the modeling of guitar amplifiers or effect pedals. Existing methods are mainly based on the supervised approach, requiring temporally-aligned data pairs of unprocessed and rendered audio. However, this approach does not scale well, due to the complicated process involved in creating the data pairs. A very recent work done by Wright et al. has explored the potential of leveraging unpaired data for training, using a generative adversarial network (GAN)-based framework. This paper extends their work by using more advanced discriminators in the GAN, and using more unpaired data for training. Specifically, drawing inspiration from recent advancements in neural vocoders, we employ in our GANbased model for guitar amplifier modeling two sets of discriminators, one based on multi-scale discriminator (MSD) and the other multi-period discriminator (MPD). Moreover, we experiment with adding unprocessed audio signals that do not have the corresponding rendered audio of a target tone to the training data, to see how much the GAN model benefits from the unpaired data. Our experiments show that the proposed two extensions contribute to the modeling of both low-gain and high-gain guitar amplifiers.
Download Measurement-Informed Nonlinear Modal Synthesis of 65 Classical Guitars When a classical guitar string is plucked, vibration energy flows through the bridge into the body and is radiated as sound. Synthesising this process for a large collection of instruments requires both an efficient nonlinear string model and a robust method for extracting instrument-specific parameters from measurements. This paper addresses both issues. Starting from the publicly available dataset of Mores, which provides impulse-response measurements on 65 classical guitars, modal parameters of the bridge compliance and of the bridge-to-air radiation path are extracted for each instrument. These feed a nonlinear string model in which transverse vibration is governed by a geometrically exact elastic potential coupled at an interior bridge point to the measured body data. The nonlinear potential is quadratised via the Scalar Auxiliary Variable (SAV) method, so that the equations of motion become linear in a scalar variable and a known gradient vector, even at the continuous level. After time discretisation, the coupled system is inverted through two sequential Sherman–Morrison rank-one updates (one for the bridge coupling, one for the SAV nonlinearity), yielding an O(N) algorithm per time step. Two regularisation techniques prevent long-term drift of the auxiliary variable. The complete pipeline is demonstrated by synthesising plucked notes across all frets and strings for each of the 65 guitars.
Download Physical Modeling of the MXR Phase 90 Guitar Effect Pedal In this study, a famous boxed effect pedal, also called stompbox, for electrical guitars is analyzed and simulated. The nodal DK method is used to create a non-linear state-space system with Matlab as a physical model for the MXR Phase 90 guitar effect pedal. A crucial component of the effect are Junction Field Effect Transistors (JFETs) which are used as variable resistors to dynamically vary the phase-shift characteristic of an allpass-filter cascade. So far, virtual analog modeling in the context of audio has mainly been applied to diode-clippers and vacuum tube circuits. This work shows an efficient way of describing the nonlinear behavior of JFETs, which are wide-spread in audio devices. To demonstrate the applicability of the proposed physical model, a real-time VST audio plug-in was implemented.
Download The Influence of Small Variations in a Simplified Guitar Amplifier Model A strongly simplified guitar amplifier model, consisting of four stages, is presented. The exponential sweep technique is used to measure the frequency dependent harmonic spectra. The influence of small variations of the system parameters on the harmonic components is analyzed. The differences of the spectra are explained and visualized.
Download CLEAN2FX: Label-Conditioned Modeling for Clean-to-Effect Guitar Audio Transformations We present Clean2FX, a study and demo of label-conditioned clean-to-effect transformation for electric guitar audio. Given a clean guitar input and a target effect label, the task is to synthesize the corresponding effected signal while preserving the musical content. Training and evaluation pairs are constructed from EGFxSet real, single-tone recordings by assembling matched clean/effected chords, melodies, and mixed timelines. This allows for controlled comparison across effects. We evaluate four neural approaches under a common spectrogram-based transformation setting: two variational autoencoders and two U-Net models that differ in whether they operate on linear or log-magnitude representations. Performance is measured using linear-magnitude spectrogram MSE and Fréchet Audio Distance. The U-Net models outperform the variational autoencoder variants. Per-effect results show that distortion effects are most readily improved, whereas delay and reverb effects exhibit weaker FAD gains despite substantial spectral-error reductions. A conditioning-sensitivity diagnostic provides evidence that the best model responds to target labels rather than collapsing to a single transformation. Our demo website compares two models applied on real-world guitar performances outside training and validation data, providing audio and spectrogram examples of the practical clean-to-effect behavior.
Download Passive Admittance Matrix Modeling for Guitar Synthesis In physics-based sound synthesis, it is generally possible to incorporate a mechanical or acoustical immittance (admittance or impedance) in the form of a digital filter. Examples include modeling of the termination of a string or a tube. However, when digital filters are fitted to measured immittance data, care has to be taken that the resulting filter corresponds to a passive mechanical or acoustical system, otherwise the stability of the instrument model is at risk. In previous work, we have presented a simple method for designing and realizing inherently passive scalar admittances, by composing the admittance as a linear combination of positive real (PR) functions with nonnegative weights. In this paper the method is extended to multidimensional admittances (admittance matrices). The admittance matrix is synthesized as a sum of PR scalar transfer functions (second-order filters) multiplied by positive semidefinite matrices. For wave-based modeling, such as digital waveguides (DWGs) or wave digital filters (WDFs), the admittance matrix is converted to a reflectance filter. The filter structure is retained during conversion, resulting in a numerically robust implementation. As an example, a dual-polarization guitar string model based on the DWG approach is connected to the reflectance model parameterized from guitar bridge admittance measurements.
Download Real-Time Simulation of a Guitar Power Amplifier This paper deals with the real time simulation of a class A single ended guitar power amplifier. Power tubes and triode models are compared, based on Norman Koren’s work. Beam tetrodes and pentodes characteristics are discussed, and displayed as Norman Koren’s model parameters. A simple output transformer model is considered, with its parameters calculated from datasheets specifications. Then, the circuit is modeled by a nonlinear differential algebraic system, with extended state-space representations. Standard numerical schemes yield efficient and stable simulations of the stage, and are implemented as VST plug-ins.
Download A Micro-Controlled Digital Effect Unit for Guitars Here we present a micro-controlled digital effect unit for guitars. Different from other undergraduate projects, we used high-quality 16-bit Analog-to-Digital (A/D) and Digital-to-Analog (D/A) converters operating at 48kHz that respectively transfer data to and from a micro-controller through serial peripheral interfaces (SPIs). We discuss the design decisions for interconnecting all these components, the project of anti-aliasing (low-pass) filters, and additional features useful for players. Finally, we show some results obtained from this device, and discuss future improvements.
Download Non-Linear Identification of an Electric Guitar Pickup Physical models of electric guitars are still not very widespread in the scientific literature. Especially, the description of the non linear behavior of pickups still requires some refinements. This paper deals with the identification of pickup non linearities based on a Hammerstein representation, by means of a specific experimental set-up to drive the pickup in a controlled way. A comparison with experimental results shows that the model succeeds in describing the pickup when used in realistic conditions.