Download Experimental Study of Guitar Pickup Nonlinearity In this paper, we focus on studying nonlinear behavior of the pickup of an electric guitar and on its modeling. The approach is purely experimental, based on physical assumptions and attempts to find a nonlinear model that, with few parameters, would be able to predict the nonlinear behavior of the pickup. In our experimental setup a piece of string is attached to a shaker and vibrates perpendicularly to the pickup in frequency range between 60 Hz and 400 Hz. The oscillations are controlled by a linearizion feedback to create a purely sinusoidal steady state movement of the string. In the first step, harmonic distortions of three different magnetic pickups (a single-coil, a humbucker, and a rail-pickup) are compared to check if they provide different distortions. In the second step, a static nonlinearity of Paiva’s model is estimated from experimental signals. In the last step, the pickup nonlinearities are compared and an empirical model that fits well all three pickups is proposed.
Download A Micro-Controlled Digital Effect Unit for Guitars Here we present a micro-controlled digital effect unit for guitars. Different from other undergraduate projects, we used high-quality 16-bit Analog-to-Digital (A/D) and Digital-to-Analog (D/A) converters operating at 48kHz that respectively transfer data to and from a micro-controller through serial peripheral interfaces (SPIs). We discuss the design decisions for interconnecting all these components, the project of anti-aliasing (low-pass) filters, and additional features useful for players. Finally, we show some results obtained from this device, and discuss future improvements.
Download Musikverb: A Harmonically Adaptive Audio Reverberation We present MusikVerb, a novel digital reverberation capable of adapting its output to the harmonic context of a live music performance. The proposed reverberation is aware of the harmonic content of an audio input signal and ‘tunes’ the reverberation output to its harmonic content using a spectral filtering technique. The dynamic behavior of MusikVerb avoids the sonic clutter of traditional reverberation, and most importantly, fosters creative endeavor by providing new expressive and musically-aware uses of reverberation. Despite its applicability to any input audio signal, the proposed effect has been designed primarily as a guitar pedal effect and a standalone software application.
Download Real-Time Wave Digital Simulation of Cascaded Vacuum Tube Amplifiers using Modified Blockwise Method Vacuum tube amplifiers, known for their acclaimed distortion characteristics, are still widely used in hi-fi audio devices. However, bulky, fragile and power-consuming vacuum tube devices have also motivated much research on digital emulation of vacuum tube amplifier behaviors. Recent studies on Wave Digital Filters (WDF) have made possible the modeling of multi-stage vacuum tube amplifiers within single WDF SPQR trees. Our research combines the latest progress on WDF with the modified blockwise method to reduce the overall computational complexity of modeling cascaded vacuum tube amplifiers by decomposing the whole circuit into several small stages containing only two adjacent triodes. Certain performance optimization methods are discussed and applied in the eventual real-time implementation.
Download Interpretation and control in AM/FM-based audio effects This paper is a continuation of our first studies on AM/FM digital audio effects, where the AM/FM decomposition equations were reviewed and some exploratory examples of effects were introduced. In the current paper we present more insight on the signals obtained with the AM/FM decomposition, intending to illustrate manipulations in the AM/FM domain that can be applied as interesting audio effects. We provide high-quality AM/FM effects and their implementations, alongside a brief objective evaluation. Audio samples and codes for real-time operation are also supplied.
Download Contact Sensor Processing for Acoustic Instrument Sensor Matching Using a Modal Architecture This paper proposes a method to filter the output of instrument contact sensors to approximate the response of a well placed microphone. A modal approach is proposed in which mode frequencies and damping ratios are fit to the frequency response of the contact sensor, and the mode gains are then determined for both the contact sensor and the microphone. The mode frequencies and damping ratios are presumed to be associated with the resonances of the instrument. Accordingly, the corresponding contact sensor and microphone mode gains will account for the instrument radiation. The ratios between the contact sensor and microphone gains are then used to create a parallel bank of second-order biquad filters to filter the contact sensor signal to estimate the microphone signal.
Download Group Delay-Based Allpass Filters for Abstract Sound Synthesis and Audio Effects Processing An algorithm for artistic spectral audio processing and synthesis using allpass filters is presented. These filters express group delay trajectories, allowing fine control of their frequency-dependent arrival times. We present methods for designing the group delay trajectories to yield a novel class of filters for sound synthesis and audio effects processing. A number of categories of group delay trajectory design are discussed, including stair-stepped, modulated, and probabilistic. Synthesis and processing examples are provided.
Download Efficient signal extrapolation by granulation and convolution with velvet noise Several methods are available nowadays to artificially extend the duration of a signal for audio restoration or creative music production purposes. The most common approaches include overlap-andadd (OLA) techniques, FFT-based methods, and linear predictive coding (LPC). In this work we describe a novel OLA algorithm based on convolution with velvet noise, in order to exploit its sparsity and spectrum flatness. The proposed method suppresses spectral coloration and achieves remarkable computational efficiency. Its issues are addressed and some design choices are explored. Experimental results are proposed and compared to a well-known FFT-based method.
Download Parametric Multi-Channel Separation and Re-Panning of Harmonic Sources In this paper, a method for separating stereophonic mixtures into their harmonic constituents is proposed. The method is based on a harmonic signal model. An observed mixture is decomposed by first estimating the panning parameters of the sources, and then estimating the fundamental frequencies and the amplitudes of the harmonic components. The number of sources and their panning parameters are estimated using an approach based on clustering of narrowband interaural level and time differences. The panning parameter distribution is modelled as a Gaussian mixture and the generalized variance is used for selecting the number of sources. The fundamental frequencies of the sources are estimated using an iterative approach. To enforce spectral smoothness when estimating the fundamental frequencies, a codebook of magnitude amplitudes is used to limit the amount of energy assigned to each harmonic. The source models are used to form Wiener filters which are used to reconstruct the sources. The proposed method can be used for source re-panning (demonstration given), remixing, and multi-channel upmixing, e.g. for hi-fi systems with multiple loudspeakers.
Download Sound morphologies due to non-linear interactions : towards a perceptive control of environmental sound-synthesis processes This paper is concerned with perceptual control strategies for physical modeling synthesis of vibrating resonant objects colliding nonlinearly with rigid obstacles. For this purpose, we investigate sound morphologies from samples synthesized using physical modeling for non-linear interactions. As a starting point, we study the effect of linear and non-linear springs and collisions on a single-degreeof-freedom system and on a stiff strings. We then synthesize realistic sounds of a stiff string colliding with a rigid obstacle. Numerical simulations allowed the definition of specific signal patterns characterizing the non linear behavior of the interaction according to the attributes of the obstacle. Finally, a global description of the sound morphology associated with this type of interaction is proposed. This study constitutes a first step towards further perceptual investigations geared towards the development of intuitive synthesis controls.