Download A Modal Approach to the Numerical Simulation of a String Vibrating Against an Obstacle: Applications to Sound Synthesis A number of musical instruments (electric basses, tanpuras, sitars...) have a particular timbre due to the contact between a vibrating string and an obstacle. In order to simulate the motion of such a string with the purpose of sound synthesis, various technical issues have to be resolved. First, the contact phenomenon, inherently nonlinear and producing high frequency components, must be described in a numerical manner that ensures stability. Second, as a key ingredient for sound perception, a fine-grained frequencydependent description of losses is necessary. In this study, a new conservative scheme based on a modal representation of the displacement is presented, allowing the simulation of a stiff, damped string vibrating against an obstacle with an arbitrary geometry. In this context, damping parameters together with eigenfrequencies of the system can be adjusted individually, allowing for complete control over loss characteristics. Two cases are then numerically investigated: a point obstacle located in the vicinity of the boundary, mimicking the sound of the tanpura, and then a parabolic obstacle for the sound synthesis of the sitar.
Download Spring Reverberation: A Physical Perspective Spring-based artificial reverberation was one of the earliest attempts at compact replication of room-like reverberation for studio use. The popularity and unique sound of this effect have given it a status and desirability apart from its original use. Standard methods for modeling analog audio effects are not well suited to modeling spring reverberation, due to the complex and dispersive nature of its mechanical vibration. Therefore, new methods must be examined. A typical impulse responses of a spring used for reverberation is examined, and important perceptual parameters identified. Mathematical models of spring vibration are considered, with the purpose of drawing conclusions relevant to their application in an audio environment. These models are used to produce new results relevant to the design of digital systems for the emulation of spring reverberation units. The numerical solution of these models via the finite difference method is considered. A set of measurements of two typical spring reverberation units are presented.
Download Sound morphologies due to non-linear interactions : towards a perceptive control of environmental sound-synthesis processes This paper is concerned with perceptual control strategies for physical modeling synthesis of vibrating resonant objects colliding nonlinearly with rigid obstacles. For this purpose, we investigate sound morphologies from samples synthesized using physical modeling for non-linear interactions. As a starting point, we study the effect of linear and non-linear springs and collisions on a single-degreeof-freedom system and on a stiff strings. We then synthesize realistic sounds of a stiff string colliding with a rigid obstacle. Numerical simulations allowed the definition of specific signal patterns characterizing the non linear behavior of the interaction according to the attributes of the obstacle. Finally, a global description of the sound morphology associated with this type of interaction is proposed. This study constitutes a first step towards further perceptual investigations geared towards the development of intuitive synthesis controls.
Download On Iterative Solutions for Numerical Collision Models Nonlinear interactions between different parts of musical instruments present several challenges regarding the formulation of reliable and efficient numerical sound synthesis models. This paper focuses on a numerical collision model that incorporates impact damping. The proposed energy-based approach involves an iterative solver for the solution of the nonlinear system equations. In order to ensure the efficiency of the presented algorithm a bound is derived for the maximum number of iterations required for convergence. Numerical results demonstrate energy conservation as well as convergence within a small number of iterations, which is usually much lower than the predicted bound. Finally, an application to music acoustics, involving a clarinet simulation, shows that including a loss mechanism during collisions may have a significant effect on sound production.
Download Non-Iterative Schemes for the Simulation of Nonlinear Audio Circuits In this work, a number of numerical schemes are presented in the
context of virtual-analog simulation. The schemes are linearlyimplicit in character, and hence directly solvable without iterative
methods. Schemes of increasing order of accuracy are constructed,
and convergence and stability conditions are proven formally. The
schemes are able to handle stiff problems very efficiently, because
of their fast update, and can be run at higher sample rates to reduce
aliasing. The cases of the diode clipper and ring modulator are
investigated in detail, including several numerical examples.
Download Interpolation Filters for Antiderivative Antialiasing Aliasing is an inherent problem in nonlinear digital audio processing which results in undesirable audible artefacts. Antiderivative antialiasing has proved to be an effective approach to mitigate aliasing distortion, and is based on continuous-time convolution of a linearly interpolated distorted signal with antialiasing filter kernels. However, the performance of this method is determined by the properties of interpolation filter. In this work, cubic interpolation kernels for antiderivative antialiasing are considered. For memoryless nonlinearities, aliasing reduction is improved employing cubic interpolation. For stateful systems, numerical simulation and stability analysis with respect to different interpolation kernels remain in favour of linear interpolation.
Download Rounding Corners with BLAMP The use of the bandlimited ramp (BLAMP) function as an antialiasing tool for audio signals with sharp corners is presented. Discontinuities in the waveform of a signal or its derivatives require infinite bandwidth and are major sources of aliasing in the digital domain. A polynomial correction function is modeled after the ideal BLAMP function. This correction function can be used to treat aliasing caused by sharp edges or corners which translate into discontinuities in the first derivative of a signal. Four examples of cases where these discontinuities appear are discussed: synthesis of triangular waveforms, hard clipping, and half-wave and fullwave rectification. Results obtained show that the BLAMP function is a more efficient tool for alias reduction than oversampling. The polynomial BLAMP can reduce the level of aliasing components by up to 50 dB and improve the overall signal-to-noise ratio by about 20 dB. The proposed method can be incorporated into virtual analog models of musical systems.
Download Differentiable All-Pole Filters for Time-Varying Audio Systems Infinite impulse response filters are an essential building block of many time-varying audio systems, such as audio effects and synthesisers. However, their recursive structure impedes end-toend training of these systems using automatic differentiation. Although non-recursive filter approximations like frequency sampling and frame-based processing have been proposed and widely used in previous works, they cannot accurately reflect the gradient of the original system. We alleviate this difficulty by reexpressing a time-varying all-pole filter to backpropagate the gradients through itself, so the filter implementation is not bound to the technical limitations of automatic differentiation frameworks. This implementation can be employed within audio systems containing filters with poles for efficient gradient evaluation. We demonstrate its training efficiency and expressive capabilities for modelling real-world dynamic audio systems on a phaser, time-varying subtractive synthesiser, and feed-forward compressor. We make our code and audio samples available and provide the trained audio effect and synth models in a VST plugin1 .